GL-8002 LED special contriller

OPERATING INSTRUCTIONS

Choose the operating mode by pressing the MODE button to select: DMX, Manual, Roll or Auto modes.

A) DMX Mode: In DMX mode, press the FUNCTION button. The LED menu display will show either doo1 or d-p1. "d001" denotes that initiatve address to receive DMX signals. Press UP or DOWN to adjust the address between 001 to 512; enter d-p1, denores the mode of reception of DMX signal, press UP or DOWN to choose P1 or P2, the work mode as following.

B) Manual Mode: In Manual mode, press the FUNCTION button after entering this mode, the LED menu display will show correspondingly R000 or G000 or B000. R denotes red output, G denotes green output and B denotes blue output. Press UP or DOWN to adjust the output figure 000 to 255.

C) Roll Mode: In Roll mode, press the FUNCTION button after entering this mode, the display will display correspondingly ro-1 or SP01 or FS00."ro", "SP" "FS" denotes roll mode, roll speed and strobe speed respectively. Press UP and Down to adjust respectively the ROLL mode between 1 to 4, ROLL speed between 01 to FL, corresponding time between 0.12S to 6S, strobe speed between 00 to 99, corresponding speed between 25Hz to 0.5Hz.

D) Auto mode: In Auto mode, press FUNCTION button after entering this mode, the displayer will display correspondingly SP01 or FS00 or fd00. "SP","FS"&"FD" denote respectively color-changing speed, strobe speed & step speed. Press UP and Down to adjust respectively color-changing speed between 01 to 100, corresponding time between 0.12s to 6s, strobe speed between 00 to 99, corresponding speed between 25Hz to 0.5Hz, step speed between 0 to 10s.